Non-Contact
Surface Cleaning with
STATIK-AIR
Components
which are structured or not quite flat can be cleaned by the non-contact
operating system STATIC-AIR.
Ionization
units create positive and negative ions which neutralize
surface charges. = A razor-sharp blast of compressed
air from flat jet nozzles penetrates the laminar boundary layer and removes
particles from the surface. In models with suction exhaust, 'particles are
sought and carried away to a
filtration unit.
Contact
Surface Cleaning with ROTORCLEAN
Non-structured
or almost flat components with surfaces which'' are not very sensitive can also
be cleaned using the
contact system ROTORCLEAN.' The models in this system are additionally equipped
with a rotating
brush. This allows particles adhering to the component surface to be removed.
We offer you, of course, for all our systems complete solutions which you can integrate into your production line.
HAUG
offers various web cleaning systems with a suction width from 30 cm to 2 m.
Illus. 4 shows a web dedusting device fitted with two ionizing bars. A jet of
air flowing between the bars conveys the positive and negative ions to the
surface of the material at an angle. The air whirl containing the particles of
dust is sucked off where the ion jet meets the surface.